Heating, Cooling & Air Quality Services in Medina, OH

Completed spring maintenance on commercial HVAC system. Inspected and replaced dirty air filter showing significant dust and particulate accumulation. Performed temperature diagnostics using digital measuring instrument at ductwork and insulation areas to verify proper system operation and airflow efficiency.

Completed comprehensive assessment of existing HVAC system for AC retrofit project. Evaluated basement-mounted furnace unit with associated ductwork and outdoor condenser unit positioned against exterior wall. Documented current equipment specifications, duct configuration, and installation conditions including clearances, electrical connections, and drainage considerations. Photographed existing system components to establish baseline for replacement planning and verified accessibility for equipment removal and new installation.

Completed comprehensive AC retrofit installation including replacement of outdoor condenser unit and indoor air handler system. Installed new HVAC equipment in basement utility area with proper ductwork connections, PVC condensate drainage lines with safety valve, and electrical conduit routing. Positioned outdoor condenser unit against exterior brick wall with refrigerant line connections and proper clearances. All components tested and verified operational upon completion of installation.

# AC Retrofit Installation Successfully completed a full air conditioning system retrofit at a residential property. Installed a new outdoor condensing unit on a prepared mulch bed alongside the home's exterior, positioned for optimal airflow and accessibility. The beige-colored condenser was properly leveled and secured, with electrical conduit routed along the exterior siding to meet code requirements. Inside the mechanical room, installed a new evaporator coil integrated with the existing HVAC system. Completed all refrigerant line connections using insulated copper piping, ensuring proper brazing and leak-free joints. Installed new PVC condensate drain lines with appropriate pitch and fittings to ensure proper drainage. Added a safety shutoff valve to the condensate system for overflow protection. Connected electrical components including disconnect switches and verified proper voltage supply to the new equipment. Performed vacuum and pressure testing on the refrigerant lines, t

Performed comprehensive system evaluation on 19-year-old Advantage geothermal heat pump unit as requested second opinion following previous contractor assessment. Conducted thorough inspection of ground loop connections, refrigerant line sets with identification tags, air handler cabinet, and associated drainage components in basement installation. Documented current system condition with photographic evidence showing refrigerant piping configuration, insulated line sets, and overall equipment status to provide customer with informed assessment of repair versus replacement options.

Responded to service call for air conditioning unit with reported leaking in bottom drain pan. Upon arrival, performed visual inspection of outdoor condensing unit. Examined electrical components including capacitor and associated wiring connections, noting normal wear and dirt accumulation consistent with outdoor exposure. Inspected condenser coil fins for debris buildup and blockage. Checked drain pan area for signs of water accumulation and potential condensate drainage issues. Documented unit condition with photographs showing interior electrical components and exterior housing. All wiring connections appeared secure with no signs of electrical failure or immediate safety concerns.

Completed cooling maintenance on two residential HVAC systems per agreement. Inspected outdoor condensing units, tested electrical components including capacitors showing significant corrosion on terminals, and verified proper system operation. All wiring connections were examined and system performance was documented with photos for service records.

Completed routine cooling maintenance on a 10-year-old residential HVAC system. Performed comprehensive inspection of both indoor furnace unit and outdoor condensing unit, checked refrigerant pressures and levels, cleaned condenser coils, verified proper system operation, and documented equipment condition with photographs. All components found to be functioning within normal parameters.

Completed installation of zone control panel with proper wiring connections for new construction HVAC system. Performed system commissioning and verified proper operation using refrigerant manifold gauges, confirming all temperature and pressure readings were within manufacturer specifications.

Completed spring preventive maintenance on commercial HVAC unit. Performed electrical diagnostics including capacitor testing with multimeter, verifying voltage readings at 694V and inspecting wire connections and terminals. All components operating within normal parameters upon completion of scheduled maintenance inspection.

Completed spring maintenance on commercial HVAC unit. Discovered severely clogged outdoor evaporator coil with heavy accumulation of dirt, debris, and organic matter throughout fin structure. Damaged filter mesh noted and torn sections documented. Cleaned coil thoroughly to restore proper airflow and heat transfer efficiency. Inspected compressor unit, associated piping, and electrical connections for wear and proper operation. Replaced standard air filter with new Koch brand pleated filter. All equipment tested and operating within normal parameters following maintenance procedures.

Completed full HVAC system retrofit for 22-year-old furnace and air conditioning equipment as preventative replacement. Removed existing aging equipment and installed new furnace and AC system with updated PVC venting, ensuring proper clearances around water heater and basement utilities.

Completed scheduled cooling maintenance on residential split-system air conditioning unit. Inspected outdoor condensing unit, verified proper fan operation, and confirmed system airflow. Measured supply air temperature at 44.2°F, indicating adequate cooling performance and proper refrigerant charge.

Responded to no-cooling call on 4-year-old Daikin mini split system. Upon arrival, performed diagnostic inspection and opened indoor unit to access internal components, including blower assembly, heat exchanger coils, and control board. Verified system operation with remote control and documented equipment condition with photos for service records.

Completed new construction HVAC installation including Lennox heat pump system with outdoor condensing unit mounted on concrete pad and indoor equipment stack consisting of furnace and air handler installed in basement utility area. Wired and installed zone control panel, converted furnace to LP operation using kit provided at job site, and connected all necessary condensate drain lines and PVC venting to ensure proper system operation.

Performed comprehensive air conditioning tune-up and maintenance on multi-split HVAC system consisting of four outdoor condenser units, including two ground-level units and two elevated units requiring ladder access. Completed thorough inspection of all equipment, cleaned condenser coils showing significant dirt and debris accumulation, verified refrigerant levels and pressures, tested electrical connections and capacitors, and inspected air filters which were found to be in clean condition. All units operational and running within manufacturer specifications upon completion of preventive maintenance service.

Completed HVAC rough-in finish work by installing flexible ductwork to route three exhaust fans to exterior soffit terminations. Ran insulated flex duct through wall and ceiling cavities, securing connections at fan locations and terminating at soffit-mounted exhaust caps to ensure proper ventilation and code compliance.

Installed new duct smoke detector on commercial HVAC air handler unit. Device was mounted to the top cabinet surface with clear protective housing containing internal electrical components, motor assembly, and proper wiring connections. Unit tested and operational upon completion.

Completed HVAC warranty installation inspection at residential property. Verified proper operation and placement of outdoor condensing unit adjacent to home foundation, confirmed electrical connections to exterior-mounted components, and documented system installation in landscaped area with appropriate clearances maintained per manufacturer specifications.

Responded to commercial facility reporting severe humidity issues with water accumulation requiring manual mopping. Inspected Carrier WeatherMaker rooftop unit and evaluated air filtration system. Found filters dated 3-23-26 showing signs of use and debris accumulation. Documented equipment condition including refrigerant lines, electrical components, and overall system operation to address excessive moisture concerns.