Stow has enough variety in its housing that two service calls a few miles apart can look completely different. Near Fishcreek Road and Silver Springs, we work in plenty of post-war ranches and split-levels. Around Oregon Trails, larger two-story homes are more common. Sherwood Acres and Echo Hills add another mix of established properties with mature trees, basements, and mechanical systems that have been updated over the years.
That variety matters when the upstairs will not cool, one section of the house stays cold, or plumbing problems keep showing up in the basement. Lakes Heating & Air Conditioning works throughout Stow helping homeowners solve heating, cooling, plumbing, and indoor air quality problems based on how the home is actually built. Call (330) 536-1276 or contact Lakes Heating & Air Conditioning online to schedule service in Stow.
A Split-Level Near Fishcreek Needs A Different Approach
Much of Stow grew during the 1950s through the 1970s, leaving the city with ranches, split-levels, and colonials with full or partial basements. Many of those homes still use the basic duct layout installed when the house was built, even though the furnace and air conditioner may have been replaced several times.
Later development added larger two-story homes with longer duct runs and more square footage served by a single system. That is why a house near Darrow Road may have a completely different airflow problem than a newer home near Oregon Trails.
We look at the equipment, but we also pay attention to duct design, basement layout, remodeling, and previous upgrades before deciding what needs to change.
Cold Weather Exposes Heating Weaknesses Fast
Stow gets its share of long freezing stretches and sudden winter weather. A furnace that seems fine during a mild afternoon may struggle after several nights in the teens.
Gas furnaces with central air are common throughout 44224, but some established homes still use boilers with radiators or hydronic baseboard heat. Newer homes are more likely to have high-efficiency furnaces, heat pumps, or dual-fuel systems.
Our heating services include:
- Emergency heating
- Heating repair
- Heating installation
- Heating maintenance
- Furnaces
- Boilers
- Heat pumps
- Geothermal services
- Space heating
- Snowmelt systems
- HVAC services
- New construction HVAC
- Commercial heating
In a 1970s split-level near Kent Road, a cold room may point us toward duct balance or airflow. In a boiler-heated home, circulation or controls may be the issue. We trace the problem before assuming the equipment needs replaced.
Upstairs Bedrooms Often Show AC Problems First
Stow’s July and August humidity can make cooling problems obvious. Larger two-story homes around Oregon Trails may feel comfortable downstairs while bedrooms upstairs stay several degrees warmer. In older ranches and split-levels, aging or altered ductwork may keep certain rooms from getting enough conditioned air.
Humidity can also make a home feel uncomfortable even when the thermostat is reaching its setting.
Lakes provides:
- Emergency AC services
- AC repair
- AC installation
- AC maintenance
- Ductless air conditioning
- Packaged units
- HVAC services
- New construction HVAC
- Commercial AC
We check refrigerant performance, return airflow, duct condition, and system runtime together. Ductless equipment can also be a good fit for a finished basement, addition, or room that was never connected well to the original HVAC system.
Basements Carry A Lot Of The Work In Stow Homes
Full and partial basements are common throughout Stow. In many homes, the furnace, water heater, sump pump, main plumbing lines, humidifier, and large sections of ductwork are all located within a few feet of each other.
In established neighborhoods like Sherwood Acres or Echo Hills, those basements may show several generations of updates. Newer supply lines can sit beside older piping, remodeled bathroom connections may feed into original drain routes, and replacement water heaters may be installed in tight mechanical areas designed decades ago.
Our plumbing services include:
- Plumbing installation
- Plumbing repair
- Water heaters
- Drain cleaning
- Bathroom remodel plumbing
- Faucet installation and repair
- Leak detection and repair
- Gas line installation
- Garbage disposals
- Toilets
- Sinks
- Sump pumps
A sump pump running more than usual after heavy rain, changing water pressure, slower drains, or hot water that runs out sooner can all be signs worth checking before the problem gets worse.
Stow Humidity Changes With The Season
Summer humidity around Silver Springs can work its way indoors quickly. Finished basements may feel damp while upstairs rooms stay warmer and stickier than expected.
Winter brings the opposite problem. Once the furnace runs every day, indoor air can become noticeably dry. Homes with replacement windows or added insulation may also hold moisture and air differently than they did when first built.
We install and service:
- Air cleaners
- Air scrubbers
- Air purifiers
- Humidifiers
- Dehumidifiers
- Thermostats
- Carbon monoxide detection
- Air ducts and ductwork
We often look at humidity and airflow together because one can affect the other. Sometimes moisture control is the answer. In other homes, the ductwork or HVAC system is contributing to the problem.
Kent Road And Darrow Road Bring Different HVAC Demands
Route 59 and Route 91 are familiar parts of daily life in Stow. Around Kent Road and Darrow Road, restaurants, retail spaces, medical offices, and other businesses place very different demands on HVAC equipment than the nearby residential neighborhoods.
Retail and dining spaces may use rooftop packaged units. Offices and medical buildings may rely on split systems and zoning. Light industrial properties can combine office HVAC with unit heaters serving larger work areas.
Lakes provides commercial heating, commercial AC, packaged-unit service, and new construction HVAC. We look at how the building is used, how long the equipment runs, and where comfort problems show up before recommending repair or replacement.
We Explain What We Find Before Recommending The Fix
Stow homes have gone through several generations of construction and equipment changes. A comfort problem in a ranch near Fishcreek may have a different cause than the same complaint in a larger home near Fox Den Golf Course.
Our technicians take time to explain what they find. That may mean showing you an airflow restriction, explaining a difference between old and new equipment, or pointing out a maintenance issue that could help the system run more efficiently.
Service Built Around Stow Homes
From mid-century neighborhoods near Fishcreek to larger homes around Oregon Trails, Stow does not have one standard HVAC or plumbing setup. Ranches, split-levels, colonials, basement mechanical rooms, boilers, heat pumps, and decades of renovations all change what we may find when we arrive.
Lakes Heating & Air Conditioning works throughout Stow, OH 44224 helping homeowners keep their heating, cooling, plumbing, and indoor air quality systems working properly. Call (330) 536-1276 or contact us online today to schedule service.
Recent Jobs and Reviews in Stow, OH
Stow, OH at a glance
Lakes Heating, Air Conditioning & Plumbing INC has completed 20 jobs in Stow, OH between May 2026 and September 2026.
The most recent job was on September 16, 2026.
Lakes Heating, Air Conditioning & Plumbing INC has completed 50 jobs in Stow, OH in the last 12 months.
Job Locations and Reviews
Completed preventative maintenance and tune-up on residential air conditioning system. Performed comprehensive inspection of cooling equipment, checked refrigerant levels, cleaned condenser coils, verified electrical connections, and tested system operation. Additionally conducted combustion analysis on 10-year-old natural gas furnace using diagnostic equipment, recording oxygen levels at 10.0%, carbon monoxide at 26 ppm, efficiency at 95.0%, and carbon dioxide at 6.1%. All systems operating within normal parameters with no issues identified or repairs required.
Completed MVP Heat maintenance on an 11-year-old gas heating system. Performed combustion analysis using Bacharach analyzer, confirming optimal performance with oxygen level at 6.7%, carbon monoxide at 16 ppm, efficiency at 94.2%, and carbon dioxide at 8.0%. All readings within manufacturer specifications and system operating safely.
Completed furnace retrofit in residential basement utility room. Installed modern gray HVAC unit with associated white PVC condensate drain and ventilation piping, including multiple elbows and joints for proper routing. Connected black flexible ductwork and metallic flex duct to system, ensuring all connections were secure and code-compliant. Unit is operational and functioning as designed.
Performed comprehensive clean and check service on geothermal HVAC system in preparation for home inspection. Inspected control board with all electronic components functioning properly, verified LED indicators operational, and examined all wire connections and ductwork within the system. All components found to be in good working order with system ready for inspection.
Completed full HVAC system retrofit including furnace and air conditioning equipment replacement. Installed new Carrier outdoor condensing unit on concrete pad with proper leveling materials and positioned unit against exterior wall in mulched landscape area. Interior installation included new furnace/air handler unit in basement utility area with all electrical connections, circuit boards, and wiring harnesses properly terminated and secured with zip ties to terminal blocks. Verified all internal electrical components including capacitors and relays are functioning correctly, confirmed proper drainage system connections with white PVC condensate piping, and installed flexible metal conduit and junction box for electrical service. System tested and operational.
Completed rough-in ductwork installation for new addition space. Installed ductwork routing through exposed stud framing with foam insulation in preparation for final HVAC system connection. All rough-in work positioned to accommodate future wall finishing and meets code requirements for the addition.
Completed AC retrofit installation in basement mechanical room. Installed new Lennox furnace/air handler unit with proper exhaust venting through stainless steel flue pipe, white PVC condensate drainage system, and connection to existing ductwork. System positioned on concrete pad with drain pan for moisture management and secured metallic ductwork connections to ensure proper airflow distribution throughout the structure.
Performed diagnostic service and removed evaporator coil from air handling unit to allow access for third-party duct cleaning service. Disconnected refrigerant lines and removed coil assembly from unit, securing all components for reinstallation upon completion of duct cleaning work.
Completed scheduled commercial cooling maintenance on Daikin rooftop unit. Inspected RTU operation and components, replaced three KOCH brand pleated air filters in the air handling system, and verified proper airflow and system performance. All equipment operating within normal parameters at time of service.
Responded to service call for wine cooler unit in basement reporting operational failure and excessive noise. Upon arrival, unit had been shut off by customer. Conducted diagnostic inspection of equipment and surrounding mechanical space to assess condition and identify source of malfunction.
Completed estimate for mini-split installation in new addition space currently under construction. Assessed electrical panel capacity and available breaker spaces for dedicated circuit requirements, evaluated optimal indoor unit placement within OSB-framed room with exterior door access, and determined outdoor condenser location and line set routing path. Provided comprehensive proposal for equipment sizing, electrical modifications, and installation scope to condition the newly constructed space.
Conducted comprehensive estimate evaluation of commercial rooftop HVAC units. Assessed two RTU systems, documenting significant weathering and corrosion on exterior components, deteriorated electrical disconnect box with aged fuses and oxidized terminals, and standing water issues on roof membrane affecting equipment placement. Photographed equipment conditions including condenser coils, refrigerant lines, and electrical connections to support full system replacement recommendations.
# Commercial A/C System Restoration Responded to no-cooling call at commercial salon facility with reported high humidity levels causing moisture accumulation on furniture. Upon arrival, found system completely inoperative. Performed diagnostic testing on electrical components and identified failed capacitor as root cause of system failure. Measured electrical values using clamp meter to confirm capacitor degradation and verify proper amperage draw requirements for compressor operation. Removed defective capacitor showing signs of age, corrosion, and electrical failure at terminal connections. Installed new GE replacement capacitor with appropriate microfarad and voltage ratings per manufacturer specifications. Reconnected all electrical leads to proper terminals, ensuring secure connections. Cycled system through complete startup sequence and verified normal operation. Confirmed compressor engaging properly and unit cooling effectively. System restored to full operational status, re
Completed spring maintenance on commercial HVAC system per contract agreement. Performed comprehensive inspection of outdoor condensing unit and indoor air handler, including visual assessment of condenser coils, fan operation, refrigerant lines, and condensate drainage system. All components found operating within normal parameters with no immediate service needs identified. Documentation photos captured for maintenance records.
Completed full HVAC system retrofit including furnace and air conditioning installation. Installed new air handler in attic space with flexible ductwork, refrigerant lines, and electrical connections, properly insulated per code requirements. Positioned new outdoor condensing unit on concrete pad with refrigerant line set routed along exterior wall and connected to indoor equipment.
Completed full HVAC system retrofit including installation of new Lennox furnace in basement utility area with proper PVC venting routed through existing infrastructure, and installed dual Lennox outdoor condensing units on concrete pad against exterior brick wall with condensate drainage properly configured. All equipment tested, operational specifications verified, and system commissioned to manufacturer standards.
Completed full HVAC system retrofit installation in residential basement utility area. Installed new Lennox Merit Series gas furnace with associated white PVC venting and condensate drainage piping, along with metallic ductwork and air handler components. Connected copper refrigerant lines with shut-off valves, routed black flexible conduit for electrical connections, and integrated system with existing infrastructure between exposed wall studs with fiberglass insulation.
Completed routine cooling maintenance on a 5-year-old air conditioning system. Performed standard tune-up procedures including inspection of outdoor condensing unit, which showed significant exterior casing damage with exposed internal components and biological growth on housing. All maintenance tasks were completed as scheduled.
Completed installation of new American Standard toilet in residential bathroom. Removed existing toilet and installed replacement unit with new wax ring seal and closet bolts. Connected water supply using braided stainless steel flex line to chrome angle stop valve with compression fittings. Tested toilet for proper operation, flushing performance, and verified no leaks at tank-to-bowl connection, supply line connections, and base seal. Additionally installed customer-supplied showerhead in bathtub area. All fixtures tested and left in proper working condition.
Completed full HVAC system installation including integration of Arzel zoning system in attic space. Installed new ductwork with properly insulated flexible ducts, zone dampers, and control components to provide multi-zone climate control throughout the residence. All equipment mounted securely to structural framing, with proper insulation coverage maintained and system tested for optimal airflow and zone functionality.
