Heating, Cooling & Air Quality Services in Akron, OH

Responded to no cooling complaint on property with dual HVAC systems (15-16 years old) that had been without maintenance for several years. Performed comprehensive diagnostic evaluation on both air conditioning units and furnaces to assess operational status and identify failure points. Conducted combustion analysis testing on heating equipment using Testo 327-1 flue gas analyzer, measuring oxygen levels, carbon monoxide output, and excess air percentages to verify safe operation and efficiency of gas-fired appliances. First system evaluation revealed air conditioning unit running but not producing cool air, while associated furnace maintained heating capability. Second system assessment showed furnace operational issues with no heat production and air conditioning unit completely non-functional. Documented findings and provided recommendations for system servicing priorities, including option to address furnace maintenance immediately and defer air conditioning repairs until cooling s

Completed fall maintenance on heating system. Performed combustion analysis using Bacharach analyzer, which revealed acceptable readings with oxygen at 7.1%, carbon monoxide at 66 ppm, efficiency at 79.6%, and carbon dioxide at 7.8%. All measurements fall within safe operating parameters for natural gas combustion.

Completed fall maintenance on heating system. Performed combustion analysis which confirmed optimal system performance with efficiency reading of 95.9%, oxygen level at 5.4%, carbon dioxide at 8.7%, and carbon monoxide at safe level of 18 ppm.

Responded to service call for commercial tube heater that experienced operational issues at end of previous heating season. Performed diagnostic inspection of unit mounted in overhead warehouse space behind retail establishment. Utilized infrared thermometer to assess temperature readings and evaluate system performance, documenting current conditions with thermal measurements showing subzero readings indicating potential heating element or combustion issues. Inspected flexible ductwork connections, mounting hardware, and overall unit installation in corrugated metal ceiling structure to identify cause of malfunction and determine necessary repairs.

Performed follow-up inspection on residential air conditioning system to verify refrigerant pressures following previous service call. System was recharged with refrigerant and stop leak additive was introduced to address minor leak in the refrigeration circuit. Pressures were rechecked and confirmed to be within manufacturer specifications for proper system operation.

Responded to service call for A/C unit not turning on with water accumulation near equipment. Upon inspection, discovered severe frost and ice buildup on evaporator coil with significant condensation on interior components. Diagnosed restricted airflow causing coil to freeze, which resulted in water leakage when ice melted. Inspected indoor air handler unit and verified refrigerant lines, condensate drain system, and all mechanical connections. Addressed frozen coil condition, cleared condensate drainage issue, and restored proper system operation. Unit tested and confirmed cooling cycle functioning normally with no further water leakage.

# HVAC Complete System Installation Successfully completed a full HVAC system installation in residential basement mechanical room. Installed new Goodman 80% AFUE gas furnace with flue liner to replace existing heating equipment. Unit positioned on concrete floor with proper clearances for service access and safety compliance. Connected furnace to existing galvanized ductwork system running overhead through ceiling joists. Installed condensate pump at furnace base to handle moisture removal. Ran black flexible ductwork and electrical conduit from unit to ceiling connections. Ensured all duct connections properly sealed and secured to prevent air leakage. Completed all electrical connections per manufacturer specifications and local code requirements. Installed thermostat wiring and verified proper communication between control system and furnace. Tested all safety controls including limit switches, flame sensor, and pressure switches. Commissioned system with full startup procedure

Completed furnace retrofit installation in residential basement utility room. Replaced existing heating unit with new furnace system, including proper venting configuration using PVC exhaust and intake piping routed through wooden platform support structure. Verified all connections to existing ductwork and ensured proper clearances from water heater and surrounding utilities. Exterior condenser unit remains in service on concrete pad adjacent to building exterior with stone veneer siding, connected via refrigerant lines for cooling operation. System tested and operational upon completion.

Completed furnace retrofit installation in residential basement utility area. Installed new HVAC furnace system with associated electrical connections, refrigerant lines, condensate drainage piping, and proper venting. Verified electrical panel circuit compatibility and ensured all safety labels and manufacturer specifications were properly displayed on equipment.

Completed comprehensive fall heating tune-up and system inspection on natural gas furnace. Performed combustion analysis using Testo 327-1 analyzer, confirming proper operation with flue gas temperature at 106°F, excess air at 52.9%, and satisfactory airflow readings of 16-25 CFM. Verified all safety controls, electrical connections, and gas valve operation. System operating within manufacturer specifications with no issues identified.

Completed scheduled commercial cooling maintenance on rooftop Carrier GEMINI unit #2. Performed routine inspection of RTU components, verified operational status of compressor and condenser sections, and checked refrigerant lines and valve connections. Inspected rooftop exhaust ventilation system including dual-cylinder aluminum stack assembly with dome cap and mesh screening. All equipment found operating within normal parameters with no immediate service needs identified.

Responded to service call for two non-operational units serving game room and middle area. Upon inspection, identified improper filter installation affecting airflow to both Trane units. Corrected filter placement in air handling system, ensuring proper 20x24x2 filter seating within wooden frame assembly and verifying unobstructed air passage through ductwork plenum. Both units restored to normal operation with adequate airflow confirmed.

Replaced failed condenser fan motor, fan blade, and run capacitor on commercial air conditioning unit. Verified proper operation with temperature readings and confirmed new fan assembly spinning freely with adequate airflow through protective grille.

Installed a 40-gallon tall Bradford White water heater in basement utility area with proper venting and copper pipe connections. Mounted expansion tank to wall and completed all plumbing connections per manufacturer specifications and local code requirements.

Responded to no cooling complaint on commercial rooftop HVAC unit. Upon arrival, performed diagnostic testing and measured supply air temperature at 92.5°F, confirming inadequate cooling output. Inspected outdoor condensing unit, noting proper drainage trap installation and overall equipment condition, and documented findings for further evaluation of refrigerant system and compressor operation.

Responded to service call for indoor water leakage from wall-mounted ductless mini-split unit. Upon arrival, observed active leak condition and positioned collection bucket beneath unit to prevent floor damage. Performed diagnostic inspection of the mini-split system, including examination of the condensate drain line, drain pan, and air handler assembly to identify source of water intrusion into living space.

# Plumbing Service Completed Responded to service call for leaking pipes under kitchen sink. Upon inspection, identified corroded drain pipes in double-basin sink configuration causing active water leakage. The existing white PVC drainage system showed signs of deterioration with visible corrosion at connection points beneath the cabinet. Assessed the complete under-sink plumbing assembly, including dual P-trap system, horizontal drain connections, and supply lines. Replaced corroded pipe sections and reinstalled drainage components to ensure proper water flow and eliminate leaks. Verified all connections were secure and tested system for proper drainage and seal integrity. Cabinet interior showed water staining from previous leakage, confirming the need for repair. System restored to full working condition with no active leaks detected upon completion.

Conducted on-site assessment of existing water heating system in basement utility area to provide estimate for tankless water heater installation. Evaluated current plumbing configuration including copper supply lines, existing tank-style water heater, gas connections, and venting system. Photographed existing equipment layout, wall-mounted HVAC components, PVC drainage piping, and available installation space to determine optimal placement and required modifications for tankless unit conversion.

Completed fall maintenance on heating system. Performed combustion analysis using digital analyzer, verifying proper natural gas combustion with oxygen levels at 19.00% and ambient temperature reading of 71.8°F. All system parameters tested within acceptable operating ranges.

Responded to service call for clogged drains affecting three sink locations throughout the property. Upon arrival, performed diagnostic assessment of all affected fixtures, including stainless steel sink basins in compact living spaces. Utilized mechanical snaking equipment and appropriate drain cleaning methods to clear obstructions from drain lines. Removed debris and buildup causing blockages in each affected drain system. Tested water flow and drainage at all three sink locations to verify proper function and confirmed complete restoration of drainage capability. All fixtures left in working order with proper flow rates established.