Heating, Cooling & Air Quality Services in Akron, OH

Conducted comprehensive assessment of existing water heater installation in basement utility area. Evaluated 40-50 gallon capacity water heater with copper supply and distribution piping connected at top of unit. Documented severe corrosion and rust deterioration on base pan and floor area beneath water heater, indicating previous or ongoing leak conditions. Inspected mechanical components, pressure tank, and associated plumbing connections for proper operation and code compliance. Photographed current installation configuration including copper piping runs, PVC drainage, wall-mounted supports, and corroded base assembly to provide detailed documentation for water heater replacement estimate.

Completed routine maintenance on 9-year-old air conditioning system. Inspected unit components, verified proper operation, and staged materials for ongoing HVAC work in basement utility area.

Performed routine air conditioning tune-up and system inspection. Cleaned evaporator coil, checked refrigerant levels, tested electrical connections, and replaced pleated air filter with new KOCH brand filter to ensure optimal system performance and air quality.

Completed new construction HVAC installation including air handler unit mounted in attic space with metallic flex ductwork and rigid metal supply distribution system. Installed vertical supply trunk lines in basement mechanical room with polished metal ductwork connecting to horizontal air handler, integrated electrical junction box with conduit routing, and coordinated installation with existing water heating equipment and PVC drain lines. All ductwork properly sealed and secured to framing, insulation installed between wall studs, and system staged for final connections and startup upon completion of construction phase.

Completed installation of new gray metal furnace unit in basement mechanical room. Connected white PVC piping for condensate drainage and exhaust venting, integrated unit with existing gray insulated ductwork system overhead, and verified proper electrical connections. All equipment tested and confirmed operational upon completion.

Completed AC retrofit installation at residential property. Installed new furnace unit in basement utility area with associated ductwork modifications, including vertical metallic supply plenum and horizontal distribution connections. Replaced outdoor condensing unit on existing concrete pad with new gray cylindrical condenser, verified proper electrical connections to wall-mounted disconnect and power supply, and confirmed system operational functionality upon startup.

Completed new construction HVAC installation featuring dual Midea outdoor units mounted on white composite pads with proper gravel base for drainage and stability. Installed refrigerant line sets with weather-resistant insulation, established electrical connections with exterior disconnect box, and penetrated building envelope with appropriate sealing to maintain energy efficiency. All equipment positioned per manufacturer specifications with adequate clearances for service access and airflow, system tested and operational.

Completed full furnace replacement with new Lennox high-efficiency unit installed in basement utility area. Installed new chimney liner system to properly vent combustion gases. Configured PVC condensate drainage and venting system with multiple elbows routed vertically and horizontally for proper water removal and air intake/exhaust. Connected all ductwork including black flexible supply ducts and white corrugated venting pipes. Verified all electrical connections, tested furnace operation with green indicator light confirming proper system startup, and ensured all manufacturer specifications were met per unit compliance plate.

Responded to a service call for a clogged drain and water leak in a utility room break area. Upon inspection, identified significant corrosion and rust buildup on threaded pipe connections beneath the sink cabinet, with visible copper oxidation and mineral deposits indicating long-term moisture exposure. Cleared the drain blockage and addressed the leaking connection, which had caused water staining on the surrounding wooden surfaces. Documented the corroded plumbing infrastructure and completed necessary repairs to restore proper drainage and eliminate the active leak.

Conducted site evaluation for installation of 8-foot gas line to support new standby generator. Assessed existing gas meter and utility infrastructure, including current piping configuration and connection points. Documented site conditions showing weathered gas meter assembly with corroded piping and valve connections mounted on concrete foundation. Evaluated gravel bed work area and exterior wall access points along vinyl siding for optimal routing of new gas line. Provided comprehensive estimate for gas line installation, including materials and labor requirements for safe connection from existing gas meter to proposed generator location.

Completed furnace replacement with new Lennox unit installed in residential utility space. System properly positioned, connected to existing ductwork, and vented according to manufacturer specifications with all electrical and gas connections secured and tested for safe operation.

Inspected and evaluated existing boiler control system and associated mechanical components in preparation for equipment estimate. Documented current electrical control board configuration, wiring harnesses, and terminal connections, as well as basement piping infrastructure including copper supply lines, shut-off valves, flexible connectors, and existing ductwork conditions to assess replacement requirements and compatibility for new boiler installation.

Completed scheduled HVAC maintenance on 8-year-old furnace under maintenance agreement. Performed combustion analysis using diagnostic equipment, confirming optimal system performance with 97.2% efficiency, safe carbon monoxide levels at 19 ppm, and proper oxygen and carbon dioxide readings within manufacturer specifications.

Completed rerun of range hood ventilation ductwork for new construction callback. Installed new galvanized metal ductwork from interior ceiling space through roof penetration, ensuring proper routing and support. Terminated vent stack on roof surface with appropriate elbow configuration and rain cap, secured with professional flashing and weatherproofing at penetration point to prevent water infiltration.

Completed furnace retrofit in basement mechanical room. Assessed existing HVAC system configuration including air handler unit, ductwork, and piping infrastructure to determine optimal replacement approach. Documented pre-installation conditions showing existing equipment layout, exposed ceiling joists with insulated ductwork, copper piping, and structural clearances required for new furnace installation and proper ventilation routing.

Completed residential furnace retrofit, installing a new Lennox brand heating unit in the basement utility area. Removed existing furnace and installed replacement unit, connecting supply and return ductwork with proper metallic and flexible ducting transitions to integrate with the home's existing HVAC distribution system. System tested and verified operational upon completion.

Responded to attic ductwork repair request and found severely deteriorated flexible duct with torn outer vapor barrier and exposed internal insulation causing significant air leakage and energy loss. Removed damaged flexible duct section, installed new properly-sized flexible ductwork with intact insulation and vapor barrier, secured all connections with mastic and metal straps per code requirements, and supplemented attic floor insulation with additional pink fiberglass batts to restore proper R-value and thermal efficiency.

Completed fall maintenance inspection on commercial HVAC system. Documented severe corrosion throughout evaporator coils and refrigerant piping, with extensive rust, oxidation, and mineral deposits indicating prolonged moisture exposure and deteriorated system components requiring immediate attention and potential replacement to prevent system failure.

Successfully installed three 15-ton Trane rooftop units at a commercial facility. Crane services were utilized to safely position and set the RTU equipment on the roof, with all units properly rigged and placed according to manufacturer specifications and building requirements.

Completed New Construction HVAC finish work including installation of supply and return air registers throughout the residence. Installed whole-home humidifier and air scrubber system to the existing furnace unit for enhanced indoor air quality. All components tested and verified operational upon completion.