Midwestern weather can be extreme and unpredictable. Whether your broken air conditioner is running up your bill or your aging furnace is banging at night, Lakes Heating & Air Conditioning has the expertise to keep your heating, cooling, and air quality systems working reliably.
Our licensed and insured technicians service all brands if your system needs repair, and we provide free estimates when you’re ready to install a replacement. Our new construction installations guarantee builders control from the design stage to the finished home. Offering solutions for Akron homes since 1974, you can trust both our experience and our upfront pricing.
Take control of your home comfort! Contact us to schedule installation and repair services in Akron today!
Emergency HVAC Repair
When minor problems become big, they cost more time and money. If you notice these signs, it’s time for immediate repair:
- Foul smells: Odors can indicate that you need a technician to clean and sanitize your air ducts.
- Reduced airflow: Lack of or no airflow may mean blocked air ducts or other ventilation problems.
- Leaks and water damage: A clogged drain line or uneven installation can lead to leaks from your cooling system.
- Loud knocking sounds: Odd noises often indicate that your system is nearing the end of its functionality.
Comprehensive Heating Services
With an average January low of around 20 degrees in Akron, you don’t want your heating system to break down on a freezing night. Whether you are installing a geothermal unit or radiant heating, or need repair work for your furnace, boiler, or heat pump, the Lakes Heating & Air Conditioning technicians have what you need to keep your home warm all winter. An efficient system also means lower energy bills, so you don’t have to choose between affordability and comfort.
Thorough Cooling Installation & Maintenance
Our team can promptly service your system so you can get back to your summer plans. Lakes Heating & Air Conditioning is here to repair your current system or replace it with a more energy-efficient one. Not every home has the exact cooling needs, and our ductless AC offers flexibility for your home’s unique layout. Our geothermal units work with renewable energy to significantly reduce your monthly bill.
Professional Indoor Air Quality Services
Is the tree pollen forecast high in Akron today? Even with the filters of an excellent heating and cooling system, your home is susceptible to mold, bacteria, and other particles that can impact your health and allergies. Air cleaners from Lakes Heating & Air Conditioning improve your air quality and peace of mind so you can breathe easier. Our humidifiers and dehumidifiers give you total control of your home’s comfort no matter what the weather’s like outside.
Why Trust Lakes Heating & Air Conditioning?
We know our community. Whether it’s meeting your heating, cooling, and air quality needs or sponsoring local scholarships and sports teams, Lakes Heating & Air Conditioning is a reputable family-operated part of Akron. Trust AACA-accredited service from our background-checked team. We’re here for our military, veteran, and senior neighbors with special discounts. Our technicians keep your HVAC system running while our upfront pricing and financing options keep your budget in mind.
Reach out to the Lakes Heating & Air Conditioning for your free estimate today!
Lakes Heating, Air Conditioning & Plumbing INC has completed 20 jobs in Akron, OH in July 2026. The most recent job was on July 24, 2026.Recent Jobs and Reviews in Akron, OH
Akron, OH at a glance
Job Locations and Reviews
Responded to complaint of loud noise during compressor startup on 5-6 year old split system air conditioning unit. Inspected outdoor condenser unit and identified issue with contactor causing excessive noise during initial engagement. Replaced faulty contactor, tested system operation through multiple cooling cycles, and confirmed quiet startup with normal operation restored.
Completed on-site assessment of existing HVAC system for replacement estimate. Evaluated outdoor condensing unit showing signs of age, weathering, and inadequate clearance due to overgrown vegetation encroaching on equipment. Documented current system configuration including electrical disconnect, conduit routing, and equipment placement for furnace and air conditioning replacement proposal.
Performed routine maintenance inspection on residential outdoor air conditioning condenser unit. Unit found operating properly with adequate clearance from surrounding structures, secure electrical connections, and proper placement on concrete pad. Documented equipment condition with photos showing unit in good working order with no immediate service needs identified.
Completed installation of four complete HVAC systems including furnaces and air conditioning units for commercial application. Performed comprehensive leak testing on refrigerant systems using digital pressure monitoring equipment, achieving passing results with 0.2% pressure drop over five-minute test period at 314.5 PSIG. Connected and commissioned outdoor condensing units with R-454B refrigerant, verified proper refrigerant line connections, and ensured all systems met manufacturer specifications and industry standards for operation.
Completed routine air conditioning maintenance on two residential cooling systems: a 13-year-old unit located in the basement and a 9-year-old unit in the attic. Performed standard preventive maintenance procedures on the basement Lennox air handler, including filter inspection, condensate drain line verification, and visual assessment of all accessible components and ductwork to ensure proper system operation for the cooling season.
Completed AC retrofit installation at residential property. Installed new Lennox outdoor condensing unit on platform pad with gravel base against exterior wall, including electrical disconnect box and conduit connections. Interior installation included new evaporator coil integrated with existing Lennox furnace system in basement mechanical room, with proper refrigerant line connections and ductwork modifications to main plenum. System tested and verified operational with all electrical connections secured and refrigerant charge confirmed to manufacturer specifications.
Responded to callback for non-functioning zone on HZ311 zone control board. Inspected control board wiring, terminal connections, and zone indicators following previous service visit. Verified proper wire terminations at zone controller, checked LED status indicators for all three zones, and tested zone damper operation to isolate the issue with the affected zone.
Completed full HVAC system retrofit including new furnace installation in basement utility area and outdoor air conditioning condenser unit placement on exterior of residence. The furnace was positioned on concrete floor with proper ductwork connections to existing plenum system, while the AC condenser was installed on prepared mulch bed against exterior wall near French door entry point. All refrigerant lines, electrical connections, and ductwork transitions were secured and tested to ensure proper system operation and efficiency.
Completed spring/summer preventive maintenance on two Armstrong commercial air conditioning condenser units. Performed comprehensive system inspection including cleaning condenser coils, checking refrigerant pressures, verifying electrical connections, testing capacitors, and confirming proper fan motor operation on both units. All equipment found operating within manufacturer specifications with no immediate repairs required.
Completed maintenance visit on 6-year-old air conditioning system under current service agreement. System was evaluated and refrigerant charge was measured using calibrated digital scale, indicating a loss of approximately 2 pounds from optimal levels. Unit was assessed for leaks and performance issues to ensure proper cooling operation for the season.
Completed furnace retrofit installation in residential basement utility space. Installed new gray Lennox furnace unit with dual white PVC intake and exhaust venting system running vertically from top of unit. Connected copper refrigerant lines, integrated with existing green air handler cabinet, and installed galvanized metal ductwork with proper sealing and support. All manufacturer specifications verified, digital control panel programmed and operational, system tested and confirmed functioning within normal parameters.
Completed full HVAC system retrofit including furnace and air conditioning replacement at residential property. Installed new outdoor condensing unit on existing brick paver pad with proper electrical conduit and refrigerant line connections to exterior wall penetration. Replaced indoor furnace unit in basement utility area with copper refrigerant lines routed vertically and PVC condensate drain properly installed. All equipment secured, connections tested for leaks, and system commissioned to manufacturer specifications.
Completed preventive maintenance on three air conditioning units, all approximately 11 years old, as part of the MVP program. Performed standard maintenance procedures including filter inspection, system performance verification, and visual assessment of all equipment components. All units found to be in good operating condition with no immediate service needs identified.
Completed furnace and air conditioning retrofit in basement utility room. Removed existing HVAC equipment and installed new furnace unit with proper venting using white PVC piping, connected flexible metal ductwork to distribution system, and ensured all mechanical components were properly secured and operational. System tested and verified for proper airflow and functionality upon completion.
Conducted site assessment of existing gas line servicing outdoor grill connection in basement utility area. Inspected exposed gas piping system, identified termination point requiring cap installation, and provided pricing estimate for proper gas line abandonment per code requirements.
Performed preventive maintenance on two HVAC units and discovered both systems operating with insufficient refrigerant charge. Utilized digital manifold gauges to measure system pressures and temperatures, confirming low refrigerant levels on both the cooling and heating cycles. Added refrigerant to manufacturer specifications to restore proper system operation and optimize performance.
Completed annual cooling maintenance on three 13-year-old air conditioning units. Inspected and evaluated dehumidifier system, noting humidity setpoint configuration at 54% RH with unit operational. Examined condensate drainage system including PVC drain lines and verified proper water removal from equipment.
Responded to service call for water pressure adjustment and potential kitchen sink leak evaluation. Inspected plumbing system infrastructure including PEX piping, water heater connections, and supply lines in mechanical room. Assessed water pressure settings and documented existing plumbing configuration for follow-up diagnostic work on reported kitchen sink leak.
Successfully completed installation of a complete commercial HVAC system consisting of a new air handler unit and air conditioning system. The air handler was mounted in the mechanical room with proper ductwork connections, electrical conduit installation, and secure mounting to structural supports. All equipment was installed per manufacturer specifications with appropriate labeling and documentation affixed to the units.
Responded to service call for non-operational commercial rooftop A/C unit. Upon arrival, found unit severely dislodged from curb mount at approximately 45-degree angle, likely due to storm damage or structural failure. Assessed electrical connections and refrigerant lines for damage, documented equipment displacement with photographs. Unit requires professional rigging equipment to safely reposition and secure to mounting curb, along with complete electrical and refrigerant system integrity testing before restoration to service.
