Heating & Air Conditioning Services in Hudson, OH

Conducted on-site assessment for complete HVAC system replacement involving existing Lennox furnace and air conditioning unit. Evaluated basement-installed furnace with current ductwork configuration and exterior condensing unit mounted on concrete pad. Documented existing equipment specifications, duct system layout, and installation conditions to provide comprehensive replacement quotation for new heating and cooling system.

Responded to service call for two malfunctioning anti-freeze spigots located in separate areas accessible through drop ceiling. Inspected both frost-free hose bibs mounted on exterior wall with gray PVC supply lines and copper piping infrastructure visible in ceiling cavity. Verified proper operation of shutoff valves with blue handles on copper supply lines. Repaired and tested both anti-freeze spigots to ensure proper drainage function and freeze protection capability. Confirmed all connections secure and leak-free at both locations.

Completed comprehensive maintenance service on geothermal HVAC system including air handler unit and associated equipment. Inspected and serviced all accessible components, verified proper operation of air filtration system, checked ductwork connections, and confirmed system functionality. All equipment found operating within normal parameters with no issues identified during inspection.

Completed warranty service on HVAC air cleaner system by replacing damaged or deteriorated wiring. Accessed the unit through existing service opening, removed old wiring, and installed new properly rated conductors to restore full functionality. All connections were secured according to manufacturer specifications and electrical code requirements.

Completed spring maintenance on a 5-year-old residential air conditioning system located in the backyard. Performed comprehensive inspection of the outdoor condensing unit, which showed signs of environmental exposure including organic growth and weathering on the exterior casing. Conducted standard preventive maintenance procedures including system evaluation, cleaning, and operational testing to ensure optimal cooling performance for the upcoming season.

Completed final installation of HVAC condensate drainage system for new construction project. Installed and secured white PVC condensate drain lines through exterior brick foundation wall with proper pitch and mounting brackets. Verified all drain line connections, tested system operation, and documented completed installation with photographic records of exterior penetrations and drainage assembly.

Completed new construction HVAC installation of Lennox air conditioning condenser unit. Unit was properly leveled on concrete pad, refrigerant lines were insulated and installed, and system was charged to manufacturer specifications at 264 PSI as verified with calibrated gauges. All connections were tested and secured, ensuring proper airflow through ventilation louvers and optimal system performance for the newly constructed space.

Responded to service call for temperature control issue reported by building management. Upon arrival, performed system diagnostic on Lennox furnace installation. Inspected exhaust and intake PVC venting, verified proper labeling and connections, checked expansion tank operation, and examined all ductwork connections. System found operating within normal parameters with no immediate mechanical failures detected.

Completed spring maintenance on dual outdoor HVAC condensing units. Performed comprehensive system inspection, verified proper refrigerant temperatures with coil reading of 47.4°F indicating adequate cooling performance, and confirmed both units operating within normal parameters with no refrigerant leaks detected.

Completed installation of HVAC registers in new construction finish phase. All register grilles were properly fitted and secured to ductwork openings throughout the workspace, ensuring proper airflow distribution for the heating and cooling system.

Completed new construction HVAC installation including ductwork routing through attic space and floor penetrations. Cut and finished floor register opening in laminate flooring with proper subfloor access, installed supply trunk lines with appropriate vapor barriers and insulation in attic framing, and ensured all penetrations were properly sealed for optimal system performance and energy efficiency.

Completed scheduled commercial cooling maintenance visit on outdoor condensing unit. Inspected electrical components including contactor, capacitor (marked 4/7/21), and associated wiring connections within control panel. Observed operational equipment with signs of normal wear and environmental exposure. Unit accessible but surrounded by vegetation growth requiring clearance consideration for proper airflow. All electrical connections visually inspected and equipment photographed for maintenance records.

Completed scheduled commercial cooling maintenance visit on Carrier air conditioning system. Performed comprehensive inspection of outdoor condenser unit, verified electrical connections at disconnect panel including capacitor and contactor assembly, and documented equipment condition through photographic records. All components found operating within normal parameters with no immediate service requirements identified.

Completed scheduled commercial cooling maintenance visit. Inspected outdoor condenser unit and indoor evaporator coil assembly. Documented current condition of equipment with exterior condenser showing normal operation and indoor coil exhibiting dust accumulation requiring attention during routine maintenance protocol.

Completed scheduled commercial cooling maintenance on Trane XR outdoor condensing unit. Performed visual inspection of equipment exterior, verified proper installation on concrete pad with adequate clearance, confirmed electrical disconnect box operational with proper labeling, and documented unit condition with no visible defects or immediate service needs identified.

Completed rough-in installation of bathroom exhaust fans and connected return air pan in basement area of new construction project. Installed flexible ductwork routing through ceiling joists and framed cavities, integrating HVAC components with existing structural framework and coordinating with electrical rough-in. All ventilation connections secured and positioned for final trim-out phase.

Completed new construction HVAC system startup in basement mechanical room after addressing refrigerant line installation issues. Verified proper refrigerant line routing and connections for gray furnace unit, ensured all ductwork connections were secure, and confirmed PVC drainage piping was properly installed. Successfully started up the system, tested all components for proper operation, and verified adequate airflow through the metallic ductwork running throughout the space.

Responded to no-cooling call on 5-year-old AC system. Upon arrival, confirmed unit would not power on. Performed diagnostic inspection of air handler and evaporator coil assembly. Identified tripped breaker at electrical panel as root cause. Reset breaker and verified proper voltage supply to unit. Tested system operation through complete cooling cycle. Confirmed evaporator coil condition, refrigerant line connections, and condensate drain functionality. Unit restored to normal operation with proper airflow and cooling output.

# HVAC Install - A/C & Coil Completed full air conditioning system replacement including new condenser unit and evaporator coil installation. Removed existing equipment and installed new A/C system with proper refrigerant line connections, condensate drainage integration with existing PVC piping system, and electrical connections. Installed new evaporator coil in the air handler with proper ductwork connections to existing supply and return plenum. Verified all connections were secure, tested system operation, and confirmed proper airflow through the ductwork. System is fully operational and cooling efficiently.

Completed annual cooling system maintenance on five residential HVAC units located in exterior side yard area. Performed comprehensive tune-up procedures on all condensing units, including inspection of fan assemblies, electrical connections, refrigerant levels, and overall system operation. All units, including multiple Lennox branded condensers, were serviced and found to be operating within normal parameters for continued cooling season performance.