Heating, Cooling & Air Quality Services in Canal Fulton, OH

Responded to a continuously running toilet. Upon inspection, found faulty flapper valve and fill valve assembly causing water to flow constantly into the overflow tube. Replaced worn flapper and adjusted float mechanism to restore proper shut-off function, eliminating the running water issue.

Conducted new construction site visit to document installation of commercial rooftop HVAC package unit and associated indoor equipment. Photographed exterior rooftop unit mounted on curb adapter with proper elevation above roof membrane, confirmed unit positioning and clearances meet specifications. Inspected and documented interior air handling equipment mounted to ceiling structure with PVC condensate drainage system and electrical connections in place.

Completed furnace retrofit installation in residential basement utility area. Installed new furnace system with PVC venting and condensate drainage routed through exterior wall, terminating at foundation level with proper pitch and support. Integrated new equipment with existing ductwork system, electrical service panel, and plumbing infrastructure in basement mechanical room. All exhaust and intake venting installed per manufacturer specifications using appropriate PVC materials, penetrating brick exterior wall and secured with proper clearances from grade and building materials. System tested and operational upon completion.

Completed scheduled commercial filter change on HVAC furnace unit located in basement utility area. Replaced air filters per maintenance protocol and verified system operation. Equipment and surrounding work area left clean and secure upon completion.

Completed scheduled commercial filter maintenance visit on Daikin rooftop packaged HVAC unit. Accessed rooftop equipment, inspected unit operation, replaced air filters per maintenance schedule, and documented system condition with photographs. All equipment operating within normal parameters upon completion of service.

Completed full HVAC system replacement including installation of new Lennox furnace and matching outdoor condensing unit. Removed existing equipment and installed new high-efficiency furnace in basement utility area with proper venting using white PVC piping for intake and exhaust. Positioned new Lennox condensing unit on existing concrete pad against exterior wall, connected refrigerant lines, and established electrical connections. Verified all components are operational, tested system performance, and ensured proper airflow through ductwork connections.

Completed preventive maintenance service on multiple commercial rooftop HVAC units installed on flat membrane roof. Performed comprehensive PM inspection procedures on all rooftop units, including operational checks, component inspection, and system evaluation. All equipment found to be in operational condition with units mounted on proper curb adapters and structural supports. Documentation completed with photographic records of installed equipment and rooftop conditions for service history.

Completed ductwork installation for commercial building construction project. Installed ML13KCL-030-230 cooling unit and CK40CT-30B-71 equipment with Knox Cool control board, including supply air plenum and return air plenum configurations. Set up thermostat, return drop, and filter access points to ensure proper system operation and maintenance accessibility.

Responded to service call for water accumulation on floor near HVAC system. Upon inspection, found significant moisture staining on concrete floor around base of furnace unit. Photographed conditions showing water damage patterns and accessed furnace compartment to inspect internal components, blower assembly, and condensate drainage system to identify source of leak.

Completed AC retrofit installation featuring a new Lennox outdoor condensing unit and matching evaporator coil. Unit was positioned on existing pad against exterior foundation, with all refrigerant lines properly connected and insulated. System was pressure tested using digital manifold gauge, achieving 401.4 psig with leak test passing all parameters including allowable drop of 0.5% over 5-minute test duration and pressure drop remaining within acceptable limits at 0.4% change per minute. All electrical connections secured, condensate drainage verified, and unit commissioned for optimal performance.

Conducted estimate for replacement of existing York heat pump system due to excessive clanking noise and operational concerns. Assessed outdoor unit condition, documented equipment specifications, and provided homeowner with replacement options for complete HVAC system upgrade.

Responded to service call for water heater replacement in residential basement utility area. Upon arrival, assessed existing white cylindrical tanked water heater and surrounding plumbing connections. Completed full replacement of water heater unit, including disconnection and removal of old unit, installation of new tanked water heater, and reconnection of all supply lines, drain valves, and venting systems. Verified proper flue pipe connections to existing ductwork and ensured all metal piping connections at top of unit were secure and code-compliant. Tested water heater operation and confirmed system functionality before completing service.

Completed HVAC new construction finish work including installation of garage unit heater with proper venting, supply registers throughout the space, and return air drop for system balance. Installed new air filter in furnace and performed preventive maintenance inspection to ensure all equipment is operating within manufacturer specifications and ready for occupancy.

Responded to callback for non-operational air conditioning system. Inspected electrical components including capacitor and contactor assembly. Verified proper wire connections at capacitor terminals and checked contactor operation. Tested system startup and confirmed unit returned to normal cooling operation.

Completed MVP Cool maintenance service on ground-level residential air conditioning condenser unit. Performed comprehensive system inspection, cleaned condenser coils, checked refrigerant levels, tested electrical components, and verified proper operation of all cooling system functions. Unit operating within normal parameters with no renewal required at this time.

Completed comprehensive site assessment for commercial AC retrofit project. Evaluated existing rooftop HVAC unit and associated ductwork system, including metallic supply duct routing through attic space and flexible ductwork connections. Documented current equipment configuration, electrical conduit pathways, and rooftop mounting conditions to develop replacement specifications for aging commercial air conditioning system.

Completed AC retrofit installation at residential property. Installed new Lennox air conditioning condenser unit on exterior pad with proper electrical disconnect and refrigerant line connections. Replaced indoor evaporator coil to match new outdoor unit, integrated with existing Lennox furnace system in basement mechanical room. Verified all refrigerant lines, electrical connections, and condensate drainage are properly installed and functioning. System tested and operational.

Responded to service call for non-operational rooftop air conditioning unit. Inspected Frigidaire commercial condenser and electrical panel, documenting capacitor dated 7/9/20 and all electrical connections including contactors, relays, and control board. Diagnosed system failure, performed necessary repairs to restore cooling operation to affected unit.

Completed AC retrofit installation at residential property. Installed new outdoor condensing unit with proper refrigerant line connections and electrical disconnect, positioned on rock bed with adequate clearance for airflow and service access. Verified indoor air handler compatibility with existing furnace system in basement mechanical room, confirmed all electrical connections, and ensured proper integration with current HVAC infrastructure.

Responded to service call for leaking humidifier with reported tubing issue. Upon inspection of the mechanical system in the basement, examined the humidifier installation, associated water supply lines, and drainage connections. Identified compromised tubing causing water leak, replaced defective components, and verified proper operation of the humidifier system with no further leakage detected.