Maintaining consistent comfort indoors means having a reliable HVAC technician to deliver prompt, professional solutions when needed most. At Lakes Heating & Air Conditioning, we have proudly served as Northeast Ohio’s heating and air conditioning experts since 1974. We go above and beyond to deliver convenient, cost-effective solutions that last.
Schedule HVAC services in Wadsworth, OH, by calling our team now.

HVAC Repair
Homeowners need to be aware of the signs that their systems need immediate service to prevent further damage to their equipment. The following are just some of the most common signs you need HVAC repair:
- Complete failure: If your HVAC system stops working entirely, it indicates a significant problem that requires immediate attention.
- Strange noises: Unusual sounds like banging, grinding, or screeching could indicate mechanical issues or loose parts.
- Uneven temperatures: If you notice uneven heating or cooling, it may indicate problems with your HVAC system’s airflow, ductwork, or thermostat.
- Short-cycling: If your HVAC system is frequently turning on and off, there may be refrigerant leaks or issues with your thermostat, air filters, or electrical components.
At Lakes Heating & Air Conditioning, we provide repair services throughout Wadsworth and the surrounding region. No matter what time of day or night your emergency occurs, we’ll be there to provide the lasting repair solutions you need to quickly regain total comfort.
Comprehensive Heating Services
With average temperatures plummeting to just 19ºF, Wadsworth winters can be downright intolerable without functioning heating equipment. Lakes Heating & Air Conditioning is proud to deliver the comprehensive heating solutions families need to keep their homes warm and cozy on the year’s coldest days. We are here whenever you need:
- Heating repair: From flickering pilot lights to burning or gaseous odors, our heating repair specialists are here to help get your system working again.
- Heating installation and replacement: We can install and replace furnaces, boilers, heat pumps, geothermal units, and radiant heating systems.
- Heating maintenance: An annual heating tune-up can extend your system’s lifespan, enhance energy efficiency, and prevent breakdowns.
Dependable Cooling Installation & Maintenance
Summers might be mild, with temperatures in the low 80s, but high humidity can make life without a fully functioning AC system miserable. Our team offers a wide range of cooling services to help you maintain consistent comfort in your home no matter how high the temperature climbs outside:
- AC repair: Whether you have a refrigerant leak, frozen evaporator coil, or electrical malfunction, our AC repair experts can diagnose and fix the issue.
- AC installation and replacement: We have experience installing and replacing central AC, ductless mini-splits, and geothermal units.
- AC maintenance: We recommend scheduling an annual air conditioning tune-up at the end of winter or early spring.
Call our team to request HVAC repair in Wadsworth today.
Reputable Indoor Air Quality Services
Poor indoor air quality can result in mold growth, worsened allergies, respiratory irritation, and reduced HVAC efficiency. We combat these issues head-on by delivering powerful indoor air quality solutions to eliminate harmful contaminants from your air supply. Our solutions include:
Trust Lakes Heating & Air Conditioning in Wadsworth, OH
Trusted and respected in Ohio homes since 1974, Lakes Heating & Air Conditioning is proud to be the go-to comfort specialist for families throughout Wadsworth and the surrounding region. Our licensed and insured technicians are background-checked and continuously trained to deliver the highest quality care possible. With plenty of financing options availability, we strive to provide convenience and cost-effectiveness in every appointment.
Call Lakes Heating & Air Conditioning today to schedule HVAC or IAQ services in Wadsworth.
Lakes Heating, Air Conditioning & Plumbing INC has completed 20 jobs in Wadsworth, OH between June 2026 and September 2026. The most recent job was on September 4, 2026.Recent Jobs and Reviews in Wadsworth, OH
Wadsworth, OH at a glance
Job Locations and Reviews
Completed air conditioning system retrofit and preventive maintenance service. Installed new outdoor condensing unit on concrete pad with proper refrigerant line routing and electrical connections through exterior wall. Verified system operation and documented installation with interior mechanical space and exterior unit placement photographs showing proper clearances and professional installation standards.
Completed furnace and air conditioning retrofit at residential property. Removed existing HVAC equipment from basement mechanical room and installed new gas furnace with updated ductwork connections. Configured blower motor assembly and verified proper electrical connections throughout the system. Tested all components for proper operation and airflow distribution through existing duct network.
Performed scheduled heating maintenance on a 3-year-old furnace located in the basement. Conducted comprehensive system inspection and combustion analysis using digital gas analyzer, recording oxygen levels at 7.62%, carbon monoxide at 34 ppm, and carbon dioxide at 7.46% on natural gas operation. All measurements were within acceptable parameters for safe and efficient furnace operation.
Completed installation and finishing of exhaust fan system with flexible metallic ductwork routing through exposed ceiling cavity. Installed ceiling-mounted exhaust grille with integrated fan component and wall-mounted return air vent, ensuring proper ventilation for the new construction space.
Completed new construction HVAC installation at residential building site. Installed ductwork routing through floor joists and wall cavities in coordination with framing and insulation phases. System components positioned and secured per manufacturer specifications and building code requirements.
Completed installation of garage heating unit in residential new construction setting. Unit was properly mounted, vented with flexible ductwork, and positioned for optimal heat distribution throughout the garage space. Performed preventative maintenance inspection per manufacturer specifications to ensure system operates at peak efficiency and all components function correctly prior to customer handoff.
Installed MOISWELL whole-home dehumidification system in basement utility area, mounting unit on elevated PVC platform for proper drainage and accessibility. Connected unit to existing ductwork using rigid PVC condensate piping and secured electrical supply through flexible metal conduit, ensuring proper integration with home's HVAC system. Verified unit operation with digital display reading 69°F ambient temperature and confirmed all connections are secure and leak-free.
# AC Retrofit Installation
Completed full AC retrofit installation including new air handler and evaporator coil system in basement utility room. Installed new gray furnace/air handler unit with proper labeling and safety documentation affixed to front panel. Configured black flexible ductwork routing from top of unit with secure connections. Connected white PVC condensate drainage piping running vertically along unit front. Integrated copper refrigerant lines and black suction line along concrete block wall connecting indoor and outdoor components.
Performed system evacuation and vacuum testing using Yellow Jacket Omni digital vacuum gauge. Achieved proper vacuum level reading of 227 microns, well below the required 500 micron threshold, confirming system integrity and absence of leaks or moisture contamination. Maintained vacuum hold test to verify sealed system prior to refrigerant charge.
All electrical connections completed per manufacturer specifications. System tested and ope
Responded to no cooling complaint in upstairs zone following recent service visit. Inspected attic-mounted air handler and associated refrigerant lines, ductwork, and insulation installation. Verified system operation and ensured all components were properly secured and functioning to restore cooling to affected area.
Performed comprehensive tune-up and safety inspection on furnace and air conditioning system for new homeowner. Conducted combustion analysis on gas furnace using digital analyzer, confirming safe operation with oxygen levels at 7.79%, carbon monoxide at 9 ppm, and carbon dioxide at 7.36%. Both heating and cooling systems found to be operating within normal parameters with no immediate concerns identified.
Completed quality inspection of new construction HVAC installation and documented register specifications. Verified and photographed register list containing six vent locations with dimensional specifications including 10x10, 4x10, 4x12, 2x10, 14x6, and 30x6 registers in various heat (HT) and return configurations.
Completed comprehensive HVAC estimate for air conditioning retrofit in residential basement mechanical room. Assessed existing equipment configuration including current air handler, water heater, and associated ductwork systems. Documented condition of metal supply plenum showing significant dust accumulation and worn metallic tape at horizontal seam joint, indicating need for cleaning and resealing during replacement. Evaluated basement utility room layout and existing equipment placement to determine optimal configuration for new AC system installation. Photographed current HVAC components, ductwork transitions, and utility connections to develop accurate replacement specifications and identify any required modifications to existing infrastructure for proper retrofit integration.
# HVAC New Construction Install
Completed installation of dual Lennox outdoor condenser units on new construction residential property. Positioned two condenser units side by side on gravel base with proper composite equipment pads for stability and drainage. Units include one black condenser and one beige/tan Lennox-branded unit, both mounted against exterior wall with Tyvek house wrap. Installed insulated refrigerant line sets with proper bending radius from top of each unit. Mounted electrical disconnect box to wall for code compliance and service accessibility. Equipment properly leveled on crushed stone base to ensure optimal performance and drainage. All refrigerant lines routed and secured according to manufacturer specifications.
Responded to no cooling complaint on commercial heat pump system. Inspected Carrier air handler in attic space and outdoor condensing unit, verified all electrical connections, refrigerant lines, and ductwork connections. System evaluated and photographed for documentation purposes.
Performed comprehensive tune-up inspection on Goodman dual HVAC system including both furnace and air conditioning components. Inspected unit installed in recessed closet alcove, verified all manufacturer labels and safety warnings were intact, checked ductwork connections and condensate drain lines, and documented dirty air filter requiring replacement. System assessed and photographed for customer records, with on-site quote provided as requested.
# HVAC Install - Complete System
Completed full furnace and air conditioning retrofit installation at residential property. Installed new outdoor condensing unit with heat pump capability on gravel pad with vibration dampening base against exterior wall. Unit features high-efficiency vertical fin condenser coil and top-discharge fan configuration. Ran and connected refrigerant line set using gray insulated copper tubing with proper brass compression fittings and black foam-insulated suction line to prevent condensation. Established all refrigerant piping connections to outdoor unit with proper flare fittings and torque specifications.
Performed system commissioning and startup procedures. Connected digital manifold gauges to service ports to verify refrigerant charge and system pressures. Monitored superheat and subcooling values to ensure optimal refrigerant charge per manufacturer specifications. Verified proper airflow through condenser coil and confirmed fan motor operation. Inst
Completed new construction HVAC ductwork installation in unfinished basement mechanical space. Installed and secured multiple runs of rectangular sheet metal supply and return ductwork throughout the space using metal strapping and hangers attached to floor joists and structural supports. All ductwork properly sized, sealed, and suspended to building code specifications to serve the conditioned spaces above.
Completed installation of drain pan beneath existing water heater in basement utility area and reconnected all water supply lines and plumbing connections. Verified proper placement of hot and cold water valves, ensured secure pipe connections, and confirmed water heater is level and stable on new pan for code compliance and leak protection.
Conducted on-site assessment for complete HVAC system replacement in residential basement utility area. Evaluated existing gray metal furnace unit with mounted humidifier, associated ductwork, and overall system configuration to provide comprehensive retrofit estimate for new furnace and air conditioning equipment.
Performed comprehensive diagnostic evaluation of existing HVAC system and domestic water heater in preparation for system replacement. Inspected 2009 Rheem 40-gallon natural gas water heater showing significant condensation on exterior tank surface, indicating possible insulation failure or temperature/pressure relief concerns. Conducted combustion analysis on gas-fired equipment revealing elevated oxygen levels at 10.08% and suboptimal CO2 readings at 6.08%, suggesting improper air-to-fuel ratio and inefficient combustion. Carbon monoxide levels measured at 6 ppm, within acceptable range but indicating system requires adjustment. Documented equipment conditions via photography for replacement specifications. Provided findings to support new system installation planning.