Stow has enough variety in its housing that two service calls a few miles apart can look completely different. Near Fishcreek Road and Silver Springs, we work in plenty of post-war ranches and split-levels. Around Oregon Trails, larger two-story homes are more common. Sherwood Acres and Echo Hills add another mix of established properties with mature trees, basements, and mechanical systems that have been updated over the years.
That variety matters when the upstairs will not cool, one section of the house stays cold, or plumbing problems keep showing up in the basement. Lakes Heating & Air Conditioning works throughout Stow helping homeowners solve heating, cooling, plumbing, and indoor air quality problems based on how the home is actually built. Call (330) 536-1276 or contact Lakes Heating & Air Conditioning online to schedule service in Stow.
A Split-Level Near Fishcreek Needs A Different Approach
Much of Stow grew during the 1950s through the 1970s, leaving the city with ranches, split-levels, and colonials with full or partial basements. Many of those homes still use the basic duct layout installed when the house was built, even though the furnace and air conditioner may have been replaced several times.
Later development added larger two-story homes with longer duct runs and more square footage served by a single system. That is why a house near Darrow Road may have a completely different airflow problem than a newer home near Oregon Trails.
We look at the equipment, but we also pay attention to duct design, basement layout, remodeling, and previous upgrades before deciding what needs to change.
Cold Weather Exposes Heating Weaknesses Fast
Stow gets its share of long freezing stretches and sudden winter weather. A furnace that seems fine during a mild afternoon may struggle after several nights in the teens.
Gas furnaces with central air are common throughout 44224, but some established homes still use boilers with radiators or hydronic baseboard heat. Newer homes are more likely to have high-efficiency furnaces, heat pumps, or dual-fuel systems.
Our heating services include:
- Emergency heating
- Heating repair
- Heating installation
- Heating maintenance
- Furnaces
- Boilers
- Heat pumps
- Geothermal services
- Space heating
- Snowmelt systems
- HVAC services
- New construction HVAC
- Commercial heating
In a 1970s split-level near Kent Road, a cold room may point us toward duct balance or airflow. In a boiler-heated home, circulation or controls may be the issue. We trace the problem before assuming the equipment needs replaced.
Upstairs Bedrooms Often Show AC Problems First
Stow’s July and August humidity can make cooling problems obvious. Larger two-story homes around Oregon Trails may feel comfortable downstairs while bedrooms upstairs stay several degrees warmer. In older ranches and split-levels, aging or altered ductwork may keep certain rooms from getting enough conditioned air.
Humidity can also make a home feel uncomfortable even when the thermostat is reaching its setting.
Lakes provides:
- Emergency AC services
- AC repair
- AC installation
- AC maintenance
- Ductless air conditioning
- Packaged units
- HVAC services
- New construction HVAC
- Commercial AC
We check refrigerant performance, return airflow, duct condition, and system runtime together. Ductless equipment can also be a good fit for a finished basement, addition, or room that was never connected well to the original HVAC system.
Basements Carry A Lot Of The Work In Stow Homes
Full and partial basements are common throughout Stow. In many homes, the furnace, water heater, sump pump, main plumbing lines, humidifier, and large sections of ductwork are all located within a few feet of each other.
In established neighborhoods like Sherwood Acres or Echo Hills, those basements may show several generations of updates. Newer supply lines can sit beside older piping, remodeled bathroom connections may feed into original drain routes, and replacement water heaters may be installed in tight mechanical areas designed decades ago.
Our plumbing services include:
- Plumbing installation
- Plumbing repair
- Water heaters
- Drain cleaning
- Bathroom remodel plumbing
- Faucet installation and repair
- Leak detection and repair
- Gas line installation
- Garbage disposals
- Toilets
- Sinks
- Sump pumps
A sump pump running more than usual after heavy rain, changing water pressure, slower drains, or hot water that runs out sooner can all be signs worth checking before the problem gets worse.
Stow Humidity Changes With The Season
Summer humidity around Silver Springs can work its way indoors quickly. Finished basements may feel damp while upstairs rooms stay warmer and stickier than expected.
Winter brings the opposite problem. Once the furnace runs every day, indoor air can become noticeably dry. Homes with replacement windows or added insulation may also hold moisture and air differently than they did when first built.
We install and service:
- Air cleaners
- Air scrubbers
- Air purifiers
- Humidifiers
- Dehumidifiers
- Thermostats
- Carbon monoxide detection
- Air ducts and ductwork
We often look at humidity and airflow together because one can affect the other. Sometimes moisture control is the answer. In other homes, the ductwork or HVAC system is contributing to the problem.
Kent Road And Darrow Road Bring Different HVAC Demands
Route 59 and Route 91 are familiar parts of daily life in Stow. Around Kent Road and Darrow Road, restaurants, retail spaces, medical offices, and other businesses place very different demands on HVAC equipment than the nearby residential neighborhoods.
Retail and dining spaces may use rooftop packaged units. Offices and medical buildings may rely on split systems and zoning. Light industrial properties can combine office HVAC with unit heaters serving larger work areas.
Lakes provides commercial heating, commercial AC, packaged-unit service, and new construction HVAC. We look at how the building is used, how long the equipment runs, and where comfort problems show up before recommending repair or replacement.
We Explain What We Find Before Recommending The Fix
Stow homes have gone through several generations of construction and equipment changes. A comfort problem in a ranch near Fishcreek may have a different cause than the same complaint in a larger home near Fox Den Golf Course.
Our technicians take time to explain what they find. That may mean showing you an airflow restriction, explaining a difference between old and new equipment, or pointing out a maintenance issue that could help the system run more efficiently.
Service Built Around Stow Homes
From mid-century neighborhoods near Fishcreek to larger homes around Oregon Trails, Stow does not have one standard HVAC or plumbing setup. Ranches, split-levels, colonials, basement mechanical rooms, boilers, heat pumps, and decades of renovations all change what we may find when we arrive.
Lakes Heating & Air Conditioning works throughout Stow, OH 44224 helping homeowners keep their heating, cooling, plumbing, and indoor air quality systems working properly. Call (330) 536-1276 or contact us online today to schedule service.
Recent Jobs and Reviews in Stow, OH
Stow, OH at a glance
Lakes Heating, Air Conditioning & Plumbing INC has completed 20 jobs in Stow, OH between September 2026 and November 2026.
The most recent job was on November 20, 2026.
Lakes Heating, Air Conditioning & Plumbing INC has completed 50 jobs in Stow, OH in the last 12 months.
Job Locations and Reviews
Removed two existing heat runs serving the living room and installed two new 7" round heat runs to the addition, routed through the crawl space opening with floor registers set at the exterior wall. Connections were made to the existing plenum and supports secured along the joists.
Responded to a leaking pipe behind the wall at the boiler that was preventing system operation. Opened and inspected the wall cavity and crawl space, which revealed heavily corroded piping and flanged fittings serving the boiler supply and return lines. Isolated the affected section to address the leak and restore access for repair of the corroded piping.
Performed annual heating maintenance on a 5-year-old gas furnace, including a combustion analysis using a Bacharach analyzer. Readings were within normal operating range: Oâ‚‚ 7.3%, CO 8 ppm, COâ‚‚ 7.7%, stack temperature 115°F, and combustion efficiency of 92.1%.
Performed annual heating maintenance on a one-year-old gas furnace, including a combustion analysis with a calibrated analyzer. Readings were within normal operating parameters at O2 6.9%, CO2 7.9%, CO 29 ppm, and 97.9% efficiency, confirming clean combustion and proper burner operation. No deficiencies were identified, and the system is operating safely and efficiently.
Installed replacement inducer motor (Part #337938-786-CBP) on the heating unit as ordered through the supply channel. Following installation, performed combustion analysis with a Testo 310 analyzer, which recorded O2 at 9.3% and CO at 34 ppm, confirming the unit is operating with acceptable combustion readings.
Performed annual maintenance on a 14-year-old gas furnace, including inspection of heat exchanger, burners, and ignition components, and verified safe operation. Combustion analysis on natural gas confirmed proper performance with 91.8% efficiency, 8.3% O2, 7.1% CO2, and CO at 6 ppm, well within safe limits. The humidifier issue noted at scheduling was not documented as addressed during this visit.
Installed a new 40-gallon Bradford White natural gas water heater with a new thermal expansion tank on the domestic cold water supply. Reconnected copper water supply lines, gas line with shutoff valve, and flue venting to the existing duct, with all connections secured and visually inspected for leaks. The unit is operating properly with no signs of leakage, corrosion, or damage.
Performed a seasonal heating tune-up on a 6-year-old natural gas furnace, including inspection of key components and a combustion analysis. Flue gas readings were within normal operating range, with Oâ‚‚ at 10.8%, CO at 14 ppm, COâ‚‚ at 5.7%, stack temperature at 114°F, and combustion efficiency of 88.7%.
Performed annual maintenance on a 4-year-old gas furnace, including a combustion analysis with a Testo 310 analyzer at the flue. Readings recorded were 6.9% Oâ‚‚ and 18 ppm CO, confirming safe, within-tolerance combustion and proper burner operation.
Performed annual heating maintenance on a 2-year-old gas furnace, including a combustion analysis with a Testo 310 analyzer. Flue gas readings showed 5.7% Oâ‚‚ and 23 ppm CO, indicating normal combustion with CO within acceptable limits. System operation was verified and no deficiencies were noted.
Performed fall maintenance tune-up on the heating system, including combustion analysis using a Testo 310 analyzer. Readings recorded Oâ‚‚ at 9.2% and CO at 19 ppm, confirming the unit is operating within safe carbon monoxide limits. System inspected and left in proper working order for the heating season.
Performed fall heating maintenance on the natural gas furnace, including a combustion analysis of the flue gases. Readings showed O2 at 8.8%, CO at 12 ppm, CO2 at 6.8%, stack temperature of 96°F, and combustion efficiency of 96.9%, confirming safe CO levels and efficient, proper operation of the heating system.
Completed on-site evaluation and measurements for new construction ductwork installation in sunken floor areas. Verified framing cavity dimensions between wood framing members and assessed the foil-faced rigid insulation board to confirm adequate clearance, sealed seams, and proper support for duct routing. Documented existing conditions with photos to establish material and layout requirements for the estimate.
Responded to a reported leak from the toilet into the basement below. Inspection of the basement ceiling revealed the PVC drain assembly beneath the bathroom was perforated, with multiple small holes and rust-colored staining along the upper fitting and lower pipe segments indicating active seepage. The toilet and surrounding bathroom fixtures showed no visible damage, confirming the leak originated from the compromised drain piping rather than the fixture itself.
Completed scheduled furnace maintenance and MVP membership renewal. Performed combustion analysis using Bacharach analyzer, confirming optimal system performance with 96.5% efficiency, CO levels at 7 ppm, Oâ‚‚ at 6.5%, and COâ‚‚ at 8.1%, all within safe operating parameters.
Completed fall maintenance on heating system. Performed combustion analysis using calibrated gas detector, confirming optimal performance with oxygen levels at 8.8%, carbon monoxide at 7 ppm, efficiency at 98.4%, and carbon dioxide at 6.8%, all within manufacturer specifications.
Performed annual heating maintenance on gas-fired furnace located in basement. Conducted comprehensive system diagnostics using combustion analyzer, which confirmed proper operation with oxygen levels at 9.2%, carbon monoxide at 16 ppm, efficiency at 81.1%, and carbon dioxide at 6.6%. All readings within acceptable parameters for natural gas combustion, indicating unit is operating safely and efficiently.
Completed annual furnace maintenance and tune-up on a nine-year-old heating unit located in basement. Performed comprehensive system inspection including blower motor assembly, electrical connections, gas control valve, and all internal components. Verified proper operation of all mechanical and electrical systems, checked wiring harness connections, inspected venting and condensate drainage systems, and confirmed unit is functioning within manufacturer specifications with no issues identified.
Completed gas line installation for fireplace connection. Routed new gas piping through crawl space beneath structure, securing line to floor joists with appropriate hangers and supports. Installation included connection to existing gas supply system and proper termination point for fireplace hookup, with all work performed in accordance with applicable gas fitting codes and safety standards.
Completed fall maintenance on natural gas heating system. Performed combustion analysis using digital analyzer, confirming optimal performance with oxygen levels at 6.7%, carbon monoxide at 5 ppm, efficiency at 93.8%, and carbon dioxide at 8.0%, all within manufacturer specifications.
